Apologies first on the delay of launching the new range.

This website is being up dated, all images and specifications apart from the 370 will change

South West Diving Show - Saturday 21st to Sunday 22nd August,

Organised by Mikes waterfront BRISTOL .Purchase tickets for the event, use link below or  please call 0800 249 1995 and a member of our staff will take your ticket order.

If you are interested in joining the Subaquaholics Dive Club, click here!

  http://www.subaquaholics.co.uk/southwestdiveshow

AQ-370  retail £149.95

• Marine Grade Aluminium Body

• Mil Spec Hard Anodised coating.

• Fixed battery with under tail cap charging

• Lighting modes: 100% 60% 25% %, Strobe, SOS Mode.

• Burn time: At 100% 100 minutes at full power, 180 minutes total diminishing.

• Luminous flux: Approximately 375 Beam Lumen at 100%

• Strobe signal: One flash every second

• S.O.S. signal: Morse code flashes

• Battery pack: 3,7 Volt - 2.6Ah Lithium Ion Battery

• Charge indicator

• Charge time: 5 hour from empty

• Mains charger included

• Car Charger Included.

Specification

• Size: 45 x 195 mm

• Weight above water: 406 g

• Weight under water: 187 g

AQ-370 through to AQ-1200 guideline specifications 

IS0  9001  production
Machined  6061 billet marine grade aluminium
T6  heat teated tempering
CREE modified by us for optimum output
6000 kelvin
500 mtr depth (tested)
Focused beams from 6 - 12 deg
Li-ion on-board battery and charging port
AC & DC  chargers
1hr 30 min - 4 hours with umbilical full power, extended times with 2 lower  power settings
SOS & Strobe modes
180 Degree  enlarged magnetic power control ring.
Unique optical system PYREX 6mm lens 
Hard anodised 
Nickel Epoxy coated magnetic switch 

If you do not know what dive light or any other light for that matter produces in lumens is like buying a car and not know the engine size.You are wasting your money if you think its watts

Lumens is the single most important thing you need to know which many manufactures avoid telling you, because that tells you how bright thier products are,and thats the important bit.

AQ-1200 UK  Retail £325  Light out put 1200  lumens

Lux at 1 mtr 43,000

Handheld Primary

Features

• Marine Grade Aluminium Body

• Mil Spec Hard Anodised coating.

• Fixed battery with under tail cap charging

• Lighting modes: 100% 60% 25% %, Strobe, SOS Mode.

• Burn time: At 100% 130 minutes at full power, 170 minutes total diminishing.

• Luminous flux: 1200

• Strobe signal: One flash every second

• S.O.S. signal: Morse code flashes

• Battery pack: Lithium Ion Battery

• Charge indicator

• Charge time: 5 hour from empty

• Mains charger included

• Car Charger Included.

Specification

• Size: 72 x 218 mm

• Weight above water: 880 g

• Weight under water: 390 g

AQ-1070 .   UK  Retail £379  Light out put = 1340 lumens

AQ-1070 Hand held with optional umbilical head up grade producing 1070 lumens.

Weight in air = 960 grms. Beam angle = 12 Deg: Burn time full 2hrs 30 mins. Li-ion on-board recharge power unit.   AC & DC charger

Cannister lights from £350  at 900 lumens to  £599 for the 4500 lumens dual beam. 900 lumes 12 deg: spot  adjustable to 30 deg 4500 lumens flood

AQU-2750

Primary Umbilical power entry from 1270 lumens up to 2750. depending on power pack.

Features

• Marine Grade Aluminium Body

• Mil Spec Hard Anodised coating.

• Lighting modes: 100% 60% 25% %, Strobe, SOS Mode.

• Burn time: At 100% 300 minutes at full power,

• Luminous flux: Approximately 2750 Beam Lumens at 100%

• Strobe signal: One flash every second

• S.O.S. signal: Morse code flashes

• Battery pack: 7.4 Volt - 2.6Ah Lithium Ion Battery

• Charge indicator

• Charge time: 5 hour from empty

• Mains charger included

• Car Charger Included.

Specification

• Size Light Head: 72 x 174 mm

• Weight above water: 812 g

• Weight under water: 370 g

• Size Battery Canister

• Weight above water: 1790 g

• Weight under water: 870 g

AQUA SUN LTD

EMAIL  </a>info@aqua-sun.co.uk

Simple maintenance for your AQUASUN...

Even for us divers to follow!

After use wash torch in clean fresh water,preferably warm, especially around the magnetic control ring, this is most important to prevent build up of particles behind the selector.

Occasionally spray a little WD40 or equivalent in to the central rotating magnetic control ring.

Check the tail cap ''o'' rings every time you re charge the torch, occasionally apply a small amount of silicon grease to the rings, replace if frayed or damaged.

There is no need to attempt to remove the light head other than curiosity.

THE LIGHTHEAD HAS BEEN TESTED TO BEYOND 500 MTRS! DEPTH! its  hermetically sealed , attempting to open this will break the seal, you will invalidate the warranty. ARE WE ALL CLEAR ON THIS?

Treat this product with respect, as you should with anything that helps your well being in a unforgiving environment.